- sales@hindustansteel.com
- 390/392, Ground Floor, Shankar Mansion, Vanita Vishram Chowk, S.V.P. Road, Mumbai - 400004
Phone
+91-9820944724
+91-9820944724
Home > Our Products > High Manganese Steel Plates > Grade / Standard > Hadfield Manganese Steel Plates
Steel That Gets Stronger with Every Hit — Explore Hadfield Manganese Steel
In industries where impact and abrasion destroy ordinary steel, Hadfield Manganese Steel proves its unmatched worth. First developed in 1882 by Sir Robert Hadfield, this high-manganese austenitic steel is engineered to work-harden under stress — making it tougher with every blow. Whether you’re building a crusher liner, a rail crossing, a shot blast deflector, or a vault wall, Hadfield Steel offers superior resilience where failure is not an option.
At Hindustan Steel Corporation, we supply genuine Hadfield-grade plates with 12–14% Mn content — cut-to-size and ready for both domestic and international clients.
Hadfield Steel is an austenitic manganese alloy with 12–14% manganese and 1–1.4% carbon. Unlike conventional steel, Hadfield grade exhibits work-hardening: it becomes progressively harder when exposed to repeated impact or pressure.
Explore All Manganese Plate Grades »
| Element | Range |
|---|---|
| Manganese (Mn) | 12.0 – 14.0% |
| Carbon (C) | 1.0 – 1.4% |
| Silicon (Si) | 0.3 – 0.8% |
| Iron (Fe) | Balance |
| Sulphur & Phos | < 0.05% |
These components allow the steel to maintain a tough, non-brittle structure even under extreme service.
| Property | Value |
|---|---|
| Hardness (as supplied) | 180 – 220 BHN |
| Work-hardened Hardness | Up to 550 BHN |
| Tensile Strength | 800 – 1100 MPa |
| Elongation (%) | 30 – 50% |
| Magnetic Property | Fully Non-magnetic |
| Machinability | Poor (before or post-anneal) |
| Feature | Hadfield Steel | AR Plates (e.g., AR400) |
|---|---|---|
| Work-hardening Ability | Yes | No |
| Shock Absorption | Excellent | Limited |
| Weldability (Pre-heated) | Yes (Skilled Required) | Easier |
| Crack Resistance | High | Brittle under impact |
| Typical Applications | Crushers, Rails, Safes | Diggers, Loaders, Dump Beds |
Read: Manganese Steel vs AR500 for Crushers »
All plates are supplied with Mill Test Certificate (MTC) and optional 3rd party inspection.
Used in extreme wear applications like crushers, prisons, shot blasting machines, and earthmovers.
Yes, with special procedures — use low-hydrogen electrodes and preheat to 150°C.
Starts around 200 BHN and can go up to 550 BHN under continuous impact.
MTC with chemical and mechanical test reports, and third-party inspection (if required).
One of our clients operating 24×7 stone crushers in UAE reported a 3x increase in jaw plate life after replacing their AR500 liner with our Hadfield 12–14% Mn plate. Downtime was slashed, and impact performance stabilized even under heavy-duty boulders.
If you’re sourcing wear plates for environments where failure is not an option, go with Hadfield Manganese Steel Plates from Hindustan Steel Corporation. Built to harden, made to last — and delivered with the trust of India’s leading steel brand.
+91-22-66159018
+91-9820944724
sales@hindustansteel.com hindustansteel1@gmail.com
390/392, Ground Floor, Shankar Mansion, S.V.P. Road, Mumbai – 400004, India
High Manganese Steel Plates are engineered for high-impact environments. These plates are the top choice for industries like mining, crushing, cement, quarrying, power generation, shot blasting, and agriculture, where wear resistance is critical.
We offer a full range of grades and specifications such as ASTM A128, DIN 1.3401 / X120Mn12, and 12–14% Mn steel for crushers, plowshares, and structural applications.
At Hindustan Steel Corporation, our HIND MANGANESE plates are not just alternatives to international grades
Curious about how manganese steel behaves, whether it rusts, or how it compares with AR steel?
We are trusted exporters of high manganese steel plates to UAE, South Africa, Vietnam, Oman, and Southeast Asia, with custom cuts, seaworthy packaging, and all documentation included.
Our high manganese steel plates meet the strictest standards for abrasion resistance, impact toughness, and metallurgical reliability across industries.
Choosing between AR500, chromium carbide plates, and manganese steel? Want to know what makes Hadfield steel special, or how to cut and weld high manganese plates?
High manganese steel is unique among wear plates. It doesn’t just resist abrasion — it transforms under it. As it gets hit, it hardens. Here’s what technical buyers, engineers, and OEMs need to know:
To support engineering teams, procurement heads, and OEM partners, we provide a range of downloadable documents, buyer tools, and certification support below.
+91-22-66159018
+91-9820944724
sales@hindustansteel.com hindustansteel1@gmail.com