- sales@hindustansteel.com
- 390/392, Ground Floor, Shankar Mansion, Vanita Vishram Chowk, S.V.P. Road, Mumbai - 400004
Phone
+91-9820944724
+91-9820944724
Home > Our Products > High Tensile Steel Plates > Grade / Specification > NAXTRA 70 High Strength Steel Plates
Looking for a reliable supplier of NAXTRA 70 quenched and tempered steel plates in India? Hindustan Steel Corporation delivers precision-engineered plates for structural, automotive, and heavy-duty engineering projects — ready in cut-to-size form with mill test reports and rapid export support.
Designed for superior tensile performance and weldability, NAXTRA 70 plates are widely used in crane manufacturing, load-bearing frames, and yellow goods — where strength, weight reduction, and fatigue resistance are critical.
Available in widths up to 3000mm and thickness from 6mm to 150mm
EN 10025-6 compliant – German-make & equivalent grades in stock
High notch toughness, bendability & excellent weld performance
NAXTRA 70 is a high-strength low-alloy (HSLA) steel that undergoes quenching and tempering (Q&T) to achieve its mechanical properties. Produced by Dillinger Hütte or equivalent European mills, this grade delivers a minimum yield strength of 690 MPa and combines:
These features make NAXTRA 70 ideal for construction equipment, lifting beams, truck chassis, and crane booms.
Due to its consistent yield-to-tensile ratio, excellent elongation percentage, and tight thickness tolerances, NAXTRA 70 is commonly used in:
| Property | Typical Value |
|---|---|
| Yield Strength (Min) | 690 MPa |
| Tensile Strength | 770–940 MPa |
| Elongation (L0 = 5.65√S0) | ≥ 14% |
| Impact Test (Charpy V) | ≥ 40J at -40°C (for thickness <50mm) |
| Brinell Hardness (HB) | 250–290 HBW (typical) |
NAXTRA 70 is typically produced in accordance with EN 10025-6 standards and matches several international equivalents. The plates adhere to tight mechanical tolerances and undergo stringent mill testing.
Common equivalents include:
| Standard | Equivalent Grade |
|---|---|
| EN 10025-6 | S690QL |
| DIN | NAXTRA 70 (original mill) |
| AFNOR | E690T |
| ASTM | A514 Grade Q (approx.) |
Mill supplies available with EN 10204 3.1 / 3.2, CE marking, and ultrasonic tested options (UT EN 10160).
At Hindustan Steel Corporation, we stock cut-to-size NAXTRA 70 steel plates with the following dimensional capabilities:
Large-width plates are ideal for beams, long weldments, and chassis frames where deflection resistance is key.
NAXTRA 70 plates are manufactured via a two-stage heat treatment process:
The result? A balanced microstructure that delivers high strength without sacrificing formability or toughness.
This treatment enables use in dynamic loading conditions, offshore structures, and heavy wear applications.
Despite its high tensile nature, NAXTRA 70 is fabrication-friendly, provided basic precautions are followed:
Need help with fabrication planning? Our team supports OEMs and fabricators with weldability data and process charts.
Here’s what makes us the preferred supplier of NAXTRA 70 in India and overseas:
Whether you’re a government project buyer or a private equipment builder — we offer end-to-end material assurance.
Alongside NAXTRA 70, Hindustan Steel also stocks and supplies:
These grades are offered with comparative datasheets to help engineers make informed material decisions.
Hindustan Steel Corporation exports NAXTRA 70 plates to over 30+ countries with mill-traceable certifications and export-ready packaging.
Popular Export Destinations:
Packaging Options:
Here’s how buyers can ensure the correct NAXTRA grade is selected for their needs:
| Requirement | NAXTRA Plate Choice |
|---|---|
| High weldability + toughness | NAXTRA 70 (standard) |
| Better elongation + forming | NAXTRA 700 (low temp use) |
| Weight reduction, high payload | Combine NAXTRA 70 with 550 or 650 variants |
| German-origin quality preference | Dillimax 690T or NAXTRA Xabo |
Tip: Always check impact testing requirements (CVN @ -20°C / -40°C) for offshore and mobile equipment projects.
Need help? Our technical desk can advise within 24 hours with comparative grade charts.
Every NAXTRA 70 plate from Hindustan Steel is supplied with:
Documentation ready for tender submission, fabrication release, and government EPC approvals.
Yes, NAXTRA 70 meets similar mechanical properties as S690QL under EN 10025-6.
Tensile strength ranges from 750–950 MPa, depending on thickness.
Yes, it has good weldability with low hydrogen electrodes and standard preheat procedures.
Yes, Hindustan Steel Corporation stocks and supplies NAXTRA 70 plates across India and for export.
No, it is supplied in quenched and tempered condition—ready to use.
EN 10204 3.1 / 3.2 MTC, CE Marking, and ISO certifications.
Yes, we offer CNC cutting and cut-to-length service as per drawings.
Yes, it offers good impact resistance and weldability, suitable for harsh conditions
NAXTRA 70 offers better toughness and European spec compliance.
We accept orders as low as 1 plate or per project lot.
Yes, NAXTRA 700 is a variant with slightly tighter tensile range and better elongation.
Absolutely. We provide full datasheet + WPS recommendations on request.
UAE, Saudi Arabia, South Africa, Indonesia, Vietnam, and more.
Fast delivery, ready stock, technical support, and mill traceability — all under one roof.
Get Instant Quote, Mill Datasheet & Availability
Need current price of NAXTRA 70? Or want to check stock availability in 10mm, 25mm, or 80mm?
Email us: sales@hindustansteelcorp.com
WhatsApp Chat for mill offer + shipping quote
Datasheet PDF available on request
MOQ: 1 plate (cut-to-size supply also supported)
We dispatch within 48 hours across India and offer door delivery to fabrication yards across UAE, Saudi, and Vietnam.
+91-22-66159018
+91-9820944724
sales@hindustansteel.com hindustansteel1@gmail.com
390/392, Ground Floor, Shankar Mansion, S.V.P. Road, Mumbai – 400004, India
High tensile plates are trusted across industries for their superior load-bearing, fatigue resistance, and weldability — especially in construction machinery, bridges, trailers, shipbuilding, and pressure vessels.
Explore top-performing grades like IS 2062 E350/E450, EN 10025 S355J2, ASTM A572 Gr 50, SAILMA, JFE Hiten, and S690QL — all available with MTCs and cut-to-size options.
Cutting, Profiling, Custom Supply for OEMs
Learn how we cut, bevel, test, and label each wear plate to match project specs. From 4mm to 120mm — cut, ready, and shipped fast.
We Ship Globally – Fast & Certified
Serving buyers in UAE, Saudi Arabia, Vietnam, South Africa, and across India. All plates come with export documents and quality reports.
Looking to know the tensile strength of E350? Confused between IS 2062 vs S355J2? Or wondering if these plates are weldable? Visit our 30+ voice-search optimized FAQ library.
Read our expert guides on “Top 5 Uses of High Tensile Plates in Construction”, “When to use high tensile steel”, and “Top 5 use cases in construction & fabrication” — updated for engineers, OEMs, and fabricators.
Read our expert guides on “E350 vs E450 vs S355”, “When to use high tensile steel”, and “Top 5 use cases in construction & fabrication” — updated for engineers, OEMs, and fabricators.
Here’s why Hindustan Steel Corporation is the preferred partner for OEMs, EPCs, and heavy fabrication companies across India and overseas:
See more →
+91-22-66159018
+91-9820944724
sales@hindustansteel.com hindustansteel1@gmail.com