- sales@hindustansteel.com
- 390/392, Ground Floor, Shankar Mansion, Vanita Vishram Chowk, S.V.P. Road, Mumbai - 400004
Phone
+91-9820944724
+91-9820944724
Home > Our Products > Structural Steel Plates > Manufacturing > IS 2062 Grade A / E250 / E350 / E450
At Hindustan Steel Corporation, HIND Structural Steel Plates represent our commitment to delivering robust, reliable, and ready-to-use steel for modern civil, industrial, and infrastructure applications. Specially developed to offer high strength-to-weight ratio, superior weldability, and consistent mechanical performance, these plates outperform generic structural steel alternatives across both quality and cost-efficiency.
Ideal for fabrication of buildings, bridges, towers, sheds, and industrial structures, HIND plates are hot-rolled, certified, and customizable as per IS, EN, ASTM, and client-specific requirements. Whether you need E250-type plates for lightweight framing or E350-type for heavy load-bearing modules, HIND series delivers structural integrity at every level.
HIND Structural Steel Plates are high-strength low alloy (HSLA) hot rolled plates manufactured by Hindustan Steel Corporation. These plates are designed to match or exceed the performance of commonly used grades like:
What makes HIND plates stand out is the controlled chemistry, lower carbon equivalent, and consistent yield strength across the thickness range. Whether used in I-beam production or gantry structures, they provide excellent formability, toughness, and dimensional accuracy.
HIND plates are engineered for versatile use in:
Thanks to their balance of strength and weldability, these plates reduce fabrication costs while increasing project lifespan.
| Property | Typical Value (E250/E350 Type) |
|---|---|
| Yield Strength | 250–350 MPa |
| Tensile Strength | 410–610 MPa |
| Elongation | 22–25% |
| Carbon (C) | ≤ 0.20% |
| Manganese (Mn) | 0.90–1.50% |
| Sulphur & Phosphorus | ≤ 0.045% each |
| CE (Carbon Equivalent) | ≤ 0.42 |
| Weldability | Excellent |
| Formability | Suitable for cold/form bending |
Exact values can vary based on thickness, heat treatment, and custom spec.
HIND Structural Steel Plates are manufactured to meet and often exceed the norms set by major standards, including:
Buyers can request test certificates, mechanical property validation, third-party inspections (TPIs), and compliance with NACE, IBR, or CE norms depending on application needs
We supply HIND plates in a wide range:
We also provide cut-to-size, profile-cut, and machined plates to save fabrication time.
HIND Structural Plates are available in:
These options improve corrosion resistance, surface finish, and prepare the plates for immediate welding and erection on site.
Thanks to the low carbon equivalent (C.E. ≤ 0.42), HIND plates offer:
This reduces rework, speeds up fabrication, and ensures consistent productivity.
| Feature | HIND Plates | Regular Structural Steel |
|---|---|---|
| Strength Consistency | Yes | Varies |
| CE (Carbon Equivalent) | Controlled | Unreliable |
| Certification & TPI Ready | Yes | Often Missing |
| Dimensional Tolerance | Close Control | Loose |
| Ready-to-Weld/Coated Supply | Available | Not Always |
By choosing HIND, you reduce project delays, improve structural performance, and ensure long-term durability in critical projects.
We also offer the following grades that can be chosen alongside or as an alternative to HIND structural plates:
All plates are tested, traceable, and can be bundled as per project BOMs.
Hindustan Steel Corporation is a trusted exporter of IS 2062 E250 and E350 plates to countries across the Middle East, Africa, and Southeast Asia. Our high-strength structural plates are widely used in:
We offer FOB, CIF, and DDP shipping options, with containerized and break-bulk shipments. All export plates are provided with 3.1 / 3.2 MTC, packaging, and documentation per buyer needs.
HIND Structural Steel Plates are actively exported to over 12 countries including:
We provide export-ready documentation, phytosanitary clearance (if needed), marking as per BS/ASTM standards, heat number traceability, and on-time delivery via sea, road, or container freight.
Before placing your order, we recommend considering the following:
Our team assists with BOQ review and grade matching for domestic and export tenders.
Each HIND Structural Plate comes with:
Yes, HIND Structural Plates are engineered to meet or exceed IS 2062 E250 and EN 10025 S275JR specifications, ensuring compatibility in local and international projects.
Absolutely. These plates are commonly used in Pre-Engineered Buildings (PEBs), industrial sheds, and warehouse framing due to their high strength and easy weldability.
Yes. We offer value-added services such as SA 2.5 shot blasting and red oxide or epoxy primer coating to ensure surface readiness for fabrication and painting.
Yes, HIND plates can be supplied in custom-cut sizes as per BOQ, drawings, or fabrication layout, reducing onsite wastage and cutting costs.
Yes, with proper surface coating or galvanization, HIND structural plates perform well in coastal, humid, and industrial areas where corrosion resistance is critical.
We accept export orders starting from just 5 MT. For bulk loads, containerized and break-bulk shipping options are available globally.
Depending on the application, HIND plates can be supplied with CE marking for European standards and IBR certificates for pressure-related use cases in India.
For standard thicknesses and grades, no preheating is needed. However, for thicker sections or high-tensile grades, welding procedures may vary
Plates can be supplied in mill finish, shot-blasted finish, or coated finish (with primer or epoxy) depending on your project requirements.
Yes, third-party inspection from SGS, TUV, BV, or your nominated agency can be arranged, with full documentation and stage-wise inspection reports
HIND plates are quality-assured, traceable, and consistent in composition — making them more reliable than generic or unbranded alternatives.
Yes, we actively export to UAE, Qatar, Oman, Saudi Arabia, Kenya, South Africa, and more — with packing, documentation, and logistics support.
Yes, our internal QA and MTC (Mill Test Certificate) processes ensure batch-wise traceability and mechanical property consistency across orders.
You can request the official product datasheet or technical PDF via email or WhatsApp. We also provide test certificates with each dispatch
Get Quote, Custom Size, or Distributor Pricing
Whether you’re a civil contractor, EPC company, steel fabricator, or structural project consultant, we’re ready to support you with:
+91-22-66159018
+91-9820944724
sales@hindustansteel.com hindustansteel1@gmail.com
390/392, Ground Floor, Shankar Mansion, S.V.P. Road, Mumbai – 400004, India
DSQ Plates are used for tank building, acid/chemical storage, ducting, and electroplating lines. Their low carbon, high ductility, and anti-crack profile make them perfect for processes involving heavy forming and corrosive environments. Browse our application tabs to choose DSQ by use-case.
We supply DSQ plates in grades that comply with IS 2062, ASTM A283, and industry-specific dead soft steel specs. From thin sheets to thick, press-ready plates—get the right grade with correct mechanicals and test reports.
DSQ (Dead Soft Quality) Steel Plates may not have a globally unified standard like structural steels, but they comply with select Indian and international specifications that focus on soft, formable, and acid-resistant applications.
At Hindustan Steel Corporation, we have built a trusted name in supplying DSQ (Dead Soft Quality) Steel Plates to both domestic and international buyers involved in galvanizing, pickling, electroplating, and tank fabrication industries.
We’ve answered 40+ voice-search optimized questions including: what is DSQ plate, where to use it, what is its thickness range, and how it compares with standard steel. Visit FAQ tab for full clarity
Read FAQ →
We’ve Comparison including: what is DSQ plate, where to use it, what is its thickness range, and how it compares with standard steel.
Not sure whether to choose DSQ over IS 2062 or High Tensile? Read our DSQ blogs for real use-cases in galvanizing, chemical plants, and pickling units. Know the difference before placing bulk orders.
We understand that engineering, procurement, and QA teams need technical clarity before placing an order.
+91-22-66159018
+91-9820944724
sales@hindustansteel.com hindustansteel1@gmail.com