• sales@hindustansteel.com
  • 390/392, Ground Floor, Shankar Mansion, Vanita Vishram Chowk, S.V.P. Road, Mumbai - 400004
Facebook Twitter Youtube

Phone

+91-9820944724

Home > Our Products > DSQ (Dead Soft Quality) Steel Plates  > Export > Galvanizing Tank Plate Export

Galvanizing Tank Plate Export – Saudi Arabia

Table of Contents

Send Enquiry

Galvanizing Tank Plate Exporter to Saudi Arabia – HIND DSQ Grade

Hindustan Steel Corporation is a leading Indian exporter of DSQ (Dead Soft Quality) steel plates for galvanizing tanks, supplying to top hot-dip galvanizing plants across Saudi Arabia, including Riyadh, Jeddah, Dammam, and Jubail. Our HIND DSQ plates, produced as per IS 8917:1978, offer superior formability, corrosion resistance, and weldability—making them ideal for custom-built galvanizing tanks in structural, automotive, and utility-grade zinc coating operations.

We provide cut-to-size DSQ plates, fully traceable with BIS test certificates, ISO approval, and packing compliant with Saudi import regulations.

Why DSQ Steel Plates Are Ideal for Galvanizing Tanks?

DSQ (Dead Soft Quality) plates are preferred for galvanizing tanks because of:

  • Extra-low carbon content (for smooth forming and no edge cracking)
  • Superior bendability and notch toughness
  • Corrosion resistance for acid pre-treatment & zinc bath handling
  • Easily weldable and leakproof seam capability
  • Long service life under continuous heating & zinc exposure

Industrial Sectors in Saudi That Use Galvanizing Tanks

We supply DSQ tank-grade plates to galvanizing OEMs and end-users in:

  • Transmission tower and solar panel structure manufacturing
  • Steel pipe galvanizing plants
  • Fencing and crash barrier fabricators
  • Pre-engineered building (PEB) components
  • HVAC ducting and cable tray manufacturers

HIND DSQ Plate Properties for Galvanizing Tank Fabrication

Property Typical Value
Standard IS 8917:1978 (DSQ)
Carbon Content ≤ 0.12%
Yield Strength 240 – 260 MPa
Elongation (Min) 30%
Thickness Range 4 mm to 40 mm
Surface Condition Descaled, Pickled, Oiled
Weldability Excellent
Formability Suitable for deep drawing

BIS IS 8917:1978 Compliance – DSQ Grade for Saudi Exports

All DSQ plates supplied to Saudi Arabia comply with:

  • IS 8917:1978 (Indian Standard for Dead Soft Steel)
  • Saudi SASO norms (on request)
  • ISO 9001:2015 production controls
  • Custom fabrication standards based on galvanizer tank dimensions

Available Sizes, Thicknesses & Custom Cut Plates

We offer HIND DSQ plates for galvanizing tank making in:

  1. Thickness: 4 mm to 40 mm
  2. Width: 1250 mm, 1500 mm, 2000 mm
  3. Length: 3000 mm to 6300 mm
  4. Custom sizes: As per tank design drawing or nesting plan
  5. Edge condition: Mill edge / sheared

Thermal & Corrosion Performance in Zinc Galvanizing Plants

Our DSQ plates are tested for:

  • High resistance to continuous zinc bath exposure
  • No cracking under thermal cycling (180–450°C)
  • Zero leakage weld zones due to uniform grain structure
  • Acid resistance during HCl pretreatment steps

Fabrication, Welding, and Forming Support

We support Saudi customers with:

  1. WPS/PQR-approved welding compatibility
  2. Shearing, bending, CNC plasma cutting & chamfering
  3. Formability for rounded tank corners and bottom plates
  4. Anti-leak fabrication guidance (tank liner edge sealing)

Why Choose Hindustan Steel Corporation for Saudi Projects?

  • Export-focused packaging and logistics
  • Experience with Saudi Customs and SABER registration
  • Repeat clients across Saudi galvanizing industry
  • Ready DSQ stock for fast dispatch
  • Branded quality – HIND DSQ with certification

Related Products for Hot Dip Galvanizing Industry

  • IS 2062 E250 / E350 Sheets for plant infrastructure
  • Structural profiles for galvanizing support frames
  • Pickling tank plates for acid prep stages
  • DSQ coils and blanked sheets (on request)

Packing & Export Support to Saudi Arabia

  1. Export packaging: Waterproof tarpaulin wrap + strapped bundle
  2. Labeling: Heat number, grade, dimensions, coil/plate number
  3. Documentation: Commercial invoice, packing list, CoO, test reports
  4. Delivery Ports: Jeddah Islamic Port, Dammam, Jubail
  5. Container Options: FCL / LCL / Break Bulk (on request)

How to Choose the Right Plate for Your Galvanizing Tank?

  • Check acid/zinc exposure cycle hours
  • Select plate thickness based on tank capacity (10KL–100KL)
  • Ensure DSQ certification & BIS compliance
  • Look for guaranteed weldability and bend testing records
  • Ask for trial blank plate for fitup test (on large jobs)

Certifications & Test Reports Provided

  • MTC (Manufacturer Test Certificate) – IS 8917:1978
  • Third-party inspection (TPI) – BV, DNV, SGS
  • ISO 9001, PED, IBR (if requested)
  • Ultrasonic tested plates available on demand

FAQs Galvanizing Tank Plate Export – Saudi Arabia

It is made to Indian Standard IS 8917:1978 for Dead Soft Quality carbon steel.

Yes, Hindustan Steel regularly exports DSQ tank plates to Riyadh, Jeddah, Dammam, and Jubail.

Typically below 0.12%, ensuring soft formability and good welding behavior.

Standard tank plates range from 6 mm to 25 mm, depending on tank dimensions and load.

Yes, the low carbon steel shows good resistance to dilute acids used in the cleaning stage.

Both options available—cut-to-size as per tank nesting layout or mill-size plates.

Just send us your requirement and we’ll share CIF, FOB, or DDP pricing with all documents.

MTC, packing list, invoice, test reports, CoO, and SABER-compliant files.

Usually 10–14 days for stock-ready orders, 3–4 weeks for made-to-order.

Get Best Price for DSQ Tank Plates in Saudi – Contact Now

Send us your RFQ with size, grade, and tank drawing.
Email: sales@hindustansteel.in
WhatsApp: +91-9820944724
Attach your technical specs and receive:

  • Best export pricing
  • HS code, incoterms, and lead time
  • Datasheet and chemical + mechanical test reports
Request a Callback

Call Now

+91-22-66159018
+91-9820944724

Email

sales@hindustansteel.com hindustansteel1@gmail.com

Visit Us

390/392, Ground Floor, Shankar Mansion, S.V.P. Road, Mumbai – 400004, India

Internal Links

Applications

High tensile plates are trusted across industries for their superior load-bearing, fatigue resistance, and weldability — especially in construction machinery, bridges, trailers, shipbuilding, and pressure vessels.

Explore All Applications →

Grade & Specification

Explore top-performing grades like IS 2062 E350/E450, EN 10025 S355J2, ASTM A572 Gr 50, SAILMA, JFE Hiten, and S690QL — all available with MTCs and cut-to-size options.

Explore All Grade-Specifie →

Manufacturing & Capability

Cutting, Profiling, Custom Supply for OEMs
Learn how we cut, bevel, test, and label each wear plate to match project specs. From 4mm to 120mm — cut, ready, and shipped fast.

See Cutting Services →

Export Locations

We Ship Globally – Fast & Certified
Serving buyers in UAE, Saudi Arabia, Vietnam, South Africa, and across India. All plates come with export documents and quality reports.

View Export Capabilities →

FAQ & Voice

Looking to know the tensile strength of E350? Confused between IS 2062 vs S355J2? Or wondering if these plates are weldable? Visit our 30+ voice-search optimized FAQ library.

Read Faq’s →

Blog & Informational

Read our expert guides on “Top 5 Uses of High Tensile Plates in Construction”, “When to use high tensile steel”, and “Top 5 use cases in construction & fabrication” — updated for engineers, OEMs, and fabricators.

Read all Blogs →

Comparison

Read our expert guides on “E350 vs E450 vs S355”, “When to use high tensile steel”, and “Top 5 use cases in construction & fabrication” — updated for engineers, OEMs, and fabricators.

Read all Blogs →

Supporting (Technical & Trust Aids)

Here’s why Hindustan Steel Corporation is the preferred partner for OEMs, EPCs, and heavy fabrication companies across India and overseas:

See more →

Call Now

+91-22-66159018
+91-9820944724

Email

sales@hindustansteel.com hindustansteel1@gmail.com