- sales@hindustansteel.com
- 390/392, Ground Floor, Shankar Mansion, Vanita Vishram Chowk, S.V.P. Road, Mumbai - 400004
Phone
+91-9820944724
+91-9820944724
Home > Our Products > High Tensile Steel Plates > Grade / Specification > IS 2062 E250 / E350 / E450 High Tensile Plates
IS 2062 E250 / E350 / E450 High Tensile Plates – Supplier, Stockist & Exporter in India
Hindustan Steel Corporation supplies IS 2062 E250, E350, and E450 plates — India’s most trusted grades of hot-rolled high tensile steel used across infrastructure, automotive, oil & gas, and structural sectors. These plates are produced with controlled chemistry and mechanical precision, making them highly weldable, formable, and strong under stress.
Whether you’re constructing bridges, building cranes, or fabricating pressure vessels, IS 2062 plates offer the perfect balance of cost-efficiency, structural strength, and guaranteed yield performance. We offer all variants: E250A, E250BR, E350A/BR/BO/C, E450BR, and E450BO — all ready for export with complete Mill TC, NDT, and cut-to-size options.
IS 2062 is an Indian Standard published by the Bureau of Indian Standards (BIS) for hot rolled low, medium, and high tensile structural steel. The E250, E350, and E450 grades indicate the minimum yield strength in MPa, i.e., 250 MPa, 350 MPa, and 450 MPa respectively.
Each grade is available in variants like:
These grades are ideal substitutes for international standards like ASTM A36, S275JR, S355J2, and EN 10025-2 plates.
IS 2062 E250–E450 plates are extensively used in:
With superior weldability and high impact resistance, these plates are suited for both static and dynamic load conditions
| Grade | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation (%) | Impact Test |
|---|---|---|---|---|
| E250A | ≥ 250 | 410–540 | ≥ 23 | No |
| E250BR | ≥ 250 | 410–540 | ≥ 23 | @0°C |
| E350BR | ≥ 350 | 490–610 | ≥ 22 | @0°C |
| E450BR | ≥ 450 | 570–720 | ≥ 18 | @0°C |
Impact-tested variants ensure safety under cold conditions. Weldability is ensured with low carbon content and controlled CE%.
IS 2062 plates are equivalent to several global structural steel standards, making them a versatile and export-ready material. Below is a comparison:
| IS 2062 Grade | Equivalent Standards |
|---|---|
| E250A / BR | ASTM A36, S235JR |
| E350BR / C | EN 10025 S355J2 |
| E450BR / BO | EN 10025 S460N, S420NL |
All plates are supplied with test certificates as per EN 10204 3.1 / 3.2, and customized equivalents are available upon request for global project specifications.
We stock IS 2062 plates in a wide variety of sizes:
Customized profiles, edge-prepped blanks, and bevel-cut shapes are also available to reduce client fabrication time and waste.
While IS 2062 plates are typically hot-rolled and normalized, toughness improves based on the variant:
We also offer quenched & tempered upgrades for projects needing higher impact resistance.
IS 2062 plates are known for excellent weldability due to their low carbon equivalent (CE) values:
We also provide weld prep services, CNC cutting, and custom fabrication solutions on request.
With us, you don’t just buy plates — you get a reliable project partner
We also stock and supply:
Each grade is available with mill traceability, thickness charts, and datasheets for approval.
Hindustan Steel Corporation exports IS 2062 E250, E350 & E450 plates to over 45 countries, including:
Export-ready supply format:
We handle FOB, CIF, CFR, and DDP shipments globally from Indian ports (Nhava Sheva, Mundra, Vizag).
Choosing between E250, E350, and E450 depends on:
Need guidance? Our technical team helps you select the right grade for bridges, cranes, or pressure tanks — with test data support.
Each plate is delivered with:
Project-specific QA documentation and approval drawings are shared for government tenders, EPC contracts, and oil & gas applications.
The minimum yield strength is 350 MPa for E350A and E350BR grades.
E350 offers higher strength and slightly lower ductility compared to E250. It’s ideal for heavier load-bearing structures.
‘BR’ indicates plates are impact tested at 0°C; ‘BO’ indicates improved weldability with better toughness.
Typical max values include: C: 0.20%, Mn: 1.55%, Si: 0.45%, S & P: ≤ 0.045%, adjusted based on variant and thickness.
Used in construction, bridges, railway structures, wind towers, oil tanks, cranes, trailers, and heavy fabrication.
Yes. IS 2062 E250 ≈ ASTM A36 / S275JR; E350 ≈ S355J2; E450 ≈ EN S460.
IS 2062 plates are often used in non-code pressure vessels or tanks. For critical pressure vessels, use SA 516 Gr 70 or similar boiler grades.
Yes. E450BR/BO plates with impact-tested properties are ideal for heavy-duty structures, dynamic loads, and seismic zones.
Yes, BR and C variants are impact-tested at 0°C and -20°C respectively — ideal for low-temp environments.
Yes. These plates have excellent weldability, machinability, and cold-forming ability. Preheating may not be needed under 20mm thickness.
We offer from 3 mm up to 150 mm in thickness. Custom widths and lengths also available.
Absolutely. We provide EN 10204 3.1 / 3.2 test certificates with third-party inspections like SGS, BV, and TUV.
Yes. We provide cutting, shearing, drilling, chamfering, and CNC profiled parts based on drawings.
We cater to both small orders (1 plate) and bulk export loads with containerized packing.
Request a Quick Quote, Datasheet or Technical Consultation
Looking for current IS 2062 E350 / E450 plate price in India or export markets?
Let’s help you finalize grade + delivery timeline within minutes.
+91-22-66159018
+91-9820944724
sales@hindustansteel.com hindustansteel1@gmail.com
390/392, Ground Floor, Shankar Mansion, S.V.P. Road, Mumbai – 400004, India
High tensile plates are trusted across industries for their superior load-bearing, fatigue resistance, and weldability — especially in construction machinery, bridges, trailers, shipbuilding, and pressure vessels.
Explore top-performing grades like IS 2062 E350/E450, EN 10025 S355J2, ASTM A572 Gr 50, SAILMA, JFE Hiten, and S690QL — all available with MTCs and cut-to-size options.
Cutting, Profiling, Custom Supply for OEMs
Learn how we cut, bevel, test, and label each wear plate to match project specs. From 4mm to 120mm — cut, ready, and shipped fast.
We Ship Globally – Fast & Certified
Serving buyers in UAE, Saudi Arabia, Vietnam, South Africa, and across India. All plates come with export documents and quality reports.
Looking to know the tensile strength of E350? Confused between IS 2062 vs S355J2? Or wondering if these plates are weldable? Visit our 30+ voice-search optimized FAQ library.
Read our expert guides on “Top 5 Uses of High Tensile Plates in Construction”, “When to use high tensile steel”, and “Top 5 use cases in construction & fabrication” — updated for engineers, OEMs, and fabricators.
Read our expert guides on “E350 vs E450 vs S355”, “When to use high tensile steel”, and “Top 5 use cases in construction & fabrication” — updated for engineers, OEMs, and fabricators.
Here’s why Hindustan Steel Corporation is the preferred partner for OEMs, EPCs, and heavy fabrication companies across India and overseas:
See more →
+91-22-66159018
+91-9820944724
sales@hindustansteel.com hindustansteel1@gmail.com