- sales@hindustansteel.com
- 390/392, Ground Floor, Shankar Mansion, Vanita Vishram Chowk, S.V.P. Road, Mumbai - 400004
Phone
+91-9820944724
+91-9820944724
Home > Our Products > Quenched and Tempered Steel Plates > Export > S890QL Plates for Vietnam Market
S890QL is a high-strength quenched and tempered structural steel plate grade as per EN 10025-6 with a minimum yield strength of 890 MPa. It is ideal for Vietnamese industries looking to reduce structural weight without compromising strength.
At Hindustan Steel Corporation, we export fully traceable S890QL plates to Hà Nội, Hồ Chí Minh City, Hải Phòng, and Đà Nẵng, supplying fabricators, EPCs, and OEMs working on infrastructure, cranes, trailers, and more.
Key Highlights:
S890QL is increasingly used by Vietnamese industries looking for higher efficiency in material handling, structural and transport projects.
Common Sectors in Vietnam
Many Vietnamese buyers choose S890QL as a performance upgrade from S690QL, especially when weight savings or extreme strength is required.
| Property | Value (Typical) |
|---|---|
| Yield Strength | ≥ 890 MPa |
| Tensile Strength | 980 – 1150 MPa |
| Elongation | ≥ 10% |
| Impact Strength (Charpy) | 27J @ -40°C |
| Plate Hardness (Brinell) | Approx. 280 – 320 HBW |
| Notch Toughness | High resistance to cracking |
All properties are guaranteed as per EN 10025-6 and client specs (if any). Impact values at -40°C make it suitable for Vietnamese climates, especially in the north.
| Element | Content (%) |
|---|---|
| C | 0.20 max |
| Mn | 1.70 max |
| Si | 0.80 max |
| P | 0.020 max |
| S | 0.010 max |
| Cr | 0.50 max |
| Mo | 0.70 max |
| Ni | 1.80 max |
| B | 0.005 max |
All chemical parameters are tested and certified with each heat, ensuring full traceability for Vietnamese fabrication standards.
S890QL conforms to EN 10025-6, the European standard for high-strength quenched and tempered structural steels.
Global Equivalents often compared:
For Vietnamese clients following EU/Japanese standards, these equivalents are commonly accepted, depending on end application.
We stock and export a wide range of cut-to-size S890QL plates suitable for both standard and large structural projects.
Thickness Options:
Width & Length:
Surface Finish:
S890QL plates undergo a strict quenching and tempering process to achieve a fine microstructure that enhances:
Yield-to-toughness ratio
Crack resistance during high-load usage
Low-temperature ductility (Charpy 27J @ -40°C)
Heat treatment is fully traceable and certified, especially important for Vietnamese projects with government or EPC compliance.
S890QL is weldable, machinable, and bendable, with the following guidelines for fabrication:
Welding Tips:
Machining & Cutting:
Country of Origin Certificate and mill stamps are provided with every delivery.
We dispatch Q&T plates from Mumbai port to all major ports in KSA:
Shipping timeline:
Need custom-cut S890QL parts? We offer CNC profiling, bevel cutting, and fabrication-ready supply.
Based in Mumbai, we supply S890QL plates to Vietnam with:
Besides S890QL, we also ship:
We export S890QL plates to Vietnam via Hải Phòng, Hồ Chí Minh, and Đà Nẵng ports with full marine-grade packaging.
Packing Options:
Documents Provided
Freight: FOB Nhava Sheva or CIF Vietnamese Ports
If you’re a fabricator, EPC, or OEM in Vietnam, here’s how to make sure you’re selecting the right S890QL plates:
Hindustan Steel helps Vietnamese buyers match plate spec with equipment use — get free selection support on inquiry.
We ensure compliance with the most demanding Vietnamese and international project standards.
Our plates come with:
All export batches undergo dimensional, flatness, and surface inspection before shipment.
Yes, it has higher yield strength (890 MPa vs 690 MPa), making it ideal for lighter yet stronger designs.
It has 890 MPa yield, 980–1150 MPa tensile, and 27J impact at -40°C.
Yes, we offer CNC cut-to-size, bevelled, or fabricated plates with packing as per Vietnam norms.
We supply from 6mm to 100mm thick plates.
Yes, EN 10204 3.1 is standard; 3.2 can be provided via TPI.
Yes, with proper procedures and matching filler wires, welding is smooth.
Yes, we ship to all major Vietnamese ports via CIF or FOB terms.
We offer rust-proof bundles, wooden crates, and steel straps for marine safety.
JFE HITEN 900LE and Dillimax 890T are common equivalents.
ISO, CE, PED, EN 10204 MTC, and impact-tested reports.
Yes, especially where weight savings and strength are both critical.
Yes, just WhatsApp or email us with size and quantity.
Typically under 7225.40.90 – Flat-rolled alloy steel.
No MOQ for stock items. For new production, MOQ starts from 5 tons.
Ready to place an order or request project support?
Office:
Mumbai | Taloja MIDC, Navi Mumbai
Ask us for:
+91-22-66159018
+91-9820944724
sales@hindustansteel.com hindustansteel1@gmail.com
390/392, Ground Floor, Shankar Mansion, S.V.P. Road, Mumbai – 400004, India
Use Case-Based Pages for Key Industries
From trailers and cranes to bridges and defense — explore how Q&T plates serve critical sectors.
Compare EN 10025-6, ASTM A514, and HIND Plates
Detailed breakdown of mechanical properties, uses, and availability across grades like S690QL, S960QL, A514, and more
Cutting, Sourcing, and Certification Services
Discover our custom cutting services, compliance support, and manufacturing strength across India.
Make Smarter Purchasing Decisions
Understand key differences between Q&T grades, their use over normalized plates, and proper cutting/welding methods
Understand key differences between Q&T grades, their use over normalized plates, and proper cutting/welding methods
View All →
Supplying to UAE, Africa, Southeast Asia, Europe
Learn how we manage international dispatches with port loading, packaging, and MTC documentation.
Answers to 50+ Buyer & Technical Questions
Covers everything from pricing and thickness to welding, impact properties, and export packaging.
Read All →
Covers everything from pricing and thickness to welding, impact properties, and export packaging.
+91-22-66159018
+91-9820944724
sales@hindustansteel.com hindustansteel1@gmail.com