- sales@hindustansteel.com
- 390/392, Ground Floor, Shankar Mansion, Vanita Vishram Chowk, S.V.P. Road, Mumbai - 400004
Phone
+91-9820944724
+91-9820944724
Home > Our Products > Quenched and Tempered Plates > Application > Quenched & Tempered Steel Plates for Crane Manufacturing
When it comes to mobile cranes, crawler cranes, tower cranes, and heavy-lifting equipment — strength, weight reduction, and structural reliability are critical. This is where Quenched and Tempered (Q&T) steel plates become the industry standard.
At Hindustan Steel Corporation, we supply ultra high-strength Q&T plates used by crane OEMs and boom arm fabricators. Our inventory includes:
These plates deliver the strength-to-weight ratio required for extended crane arms, lifting frames, and telescopic boom assemblies.
Q&T plates are used across major crane categories:
Crane Applications:
Used in mobile, crawler, truck-mounted, and tower cranes manufactured to lift safely with reduced dead weight.
Cranes demand plates that offer high tensile strength, fatigue resistance, and low weight:
| Property | Typical Range |
| Yield Strength | 690 – 1100 MPa |
| Tensile Strength | 770 – 1350 MPa |
| Elongation | 12–16% |
| Impact Resistance | ≥47J at -20°C to -40°C |
| Thickness Range | 6 mm – 100 mm |
These properties enable longer lifting booms, thinner structures, and higher load ratings per crane unit weight.
Our technical team works with crane manufacturers to match material grade to function:
| Crane Section | Recommended Grades |
| Telescopic lifting booms | Strenx 960 / Dillimax 890T / HITEN 980LE |
| Lattice boom and frames | S690QL / HITEN 780LE / A514 |
| Stabilizers and outriggers | S890QL / A517 Gr B / HIND HARD 600 |
| Slewing ring base plates | Dillimax 690T / S690QL |
| Counterweight frames | Strenx 700 / HIND HARD 500 |
Lifting performance, weight optimization, and fatigue life are enhanced by Q&T plates engineered for precision-built cranes.
Our plates conform to all leading international structural steel norms for crane boom and chassis fabrication:
| Standard | Typical Grades Supplied | Application |
| EN 10025-6 | S690QL, S890QL, S960QL | Boom structures, telescopic systems |
| ASTM A514 / A517 | Grade B, E, F | Stabilizers, outriggers, platforms |
| JIS G 3128 | HITEN 780LE / HITEN 980LE | Compact cranes, mobile lifting arms |
| Dillinger Plate Spec | Dillimax 690T / 890T / 965T | High-performance crawler cranes |
| SSAB Specification | Strenx 700 / 900 / 960 | Lightweight, long-range booms |
All materials come with EN 10204 3.1 / 3.2 MTC, compliant with OEM and EPC documentation requirements.
We supply Q&T plates in standard and customized formats for crane manufacturers and steel structure fabricators:
Stock Sizes:
Fabrication Support:
Our supply is cut-to-drawing and supports quick integration into welding, shaping, or robotic assembly lines
Q&T plates are engineered to offer superior weldability and low distortion during welding and forming.
Highlights:
We provide bending radius guidelines and WPS documents for smooth integration into your crane manufacturing process.
Every plate is supplied ready for industrial fabrication — with documentation and inspection reports that meet OEM-level QA/QC.
Standard Testing:
Finishes:
We’ve been the trusted partner for crane manufacturers and heavy fabrication workshops across India, the Middle East, and Southeast Asia.
Our Advantage:
Whether you’re manufacturing a 50-ton crane or a 200-ton crawler, our plates deliver unmatched strength-to-weight precision.
Choosing the right plate often depends on lifting capacity, boom length, and cost targets:
| Crane Type / Use Case | Best-Fit Grades |
| Lightweight mobile cranes | Strenx 700 / Dillimax 690T |
| Mid-range lifting (50–100T) | S690QL / HITEN 780LE |
| High-lift telescopic cranes | S890QL / A514 Gr Q / Dillimax 890T |
| Crawler cranes & outriggers | HIND HARD 600 / HITEN 980LE |
| Budget-driven crane builds | A517 Gr B / HIND HARD 500 |
We’ll help you balance performance, lead time, and cost across your crane manufacturing cycle
We are a preferred Q&T plate exporter for crane OEMs and fabrication contractors across:
Export Countries Served:
Our export solutions include:
From one-time supplies to repeat BOQ-based orders, we deliver full-loads and part-loads worldwide.
Choosing a Q&T plate for cranes requires a mix of technical and cost thinking. Here’s what to check:
Buyer Checklist
Recommendations:
Each Q&T plate comes with traceability and test credentials for ISO, CE, or OEM auditing needs:
Documents Supplied:
Documentation is ready-to-submit for BOQ, third-party inspection, or EPC clearance.
Yes. Our Q&T plates offer excellent weldability and low distortion for robotic or manual welds.
Absolutely. We offer full CNC cutting, beveling, and hole punching as per drawing.
We supply 3.1/3.2 MTCs, impact tests, UT reports, CE certs, and full traceability.
Yes. Shot-blasted and primer-coated surfaces are available for quick paint shop use.
A514 Grade B, HIND HARD 600, and S690QL are commonly used for outriggers and base plates.
Yes, we supply multi-grade, multi-thickness bundles tailored to BOQ and drawings.
From 6 mm up to 100 mm — common for lifting arms, chassis frames, and load-bearing parts
Yes. HITEN 780LE and 980LE are widely used in Japanese and international crane builds.
Yes, we export to GCC, Europe, and Africa — with CE and TUV/SGS documentation.
Yes. We handle both domestic dispatch and international containerized or break-bulk loading
In-stock: 3–5 days. Mill-imported: 4–6 weeks based on your project requirement.
S690QL, HITEN 780LE, and Dillimax 690T work well for truss and frame construction.
Yes. Q&T plates are ideal for marine, offshore, and ship-mounted crane components.
Yes, we can share project samples, mill tests, and export client references upon request.
When every kilogram matters — and every weld holds tons of weight — you need a supplier who gets the crane industry.
Order Q&T Plates for:
Let’s build cranes that lift higher, last longer, and weigh less.
+91-22-66159018
+91-9820944724
sales@hindustansteel.com hindustansteel1@gmail.com
390/392, Ground Floor, Shankar Mansion, S.V.P. Road, Mumbai – 400004, India
Use Case-Based Pages for Key Industries
From trailers and cranes to bridges and defense — explore how Q&T plates serve critical sectors.
Compare EN 10025-6, ASTM A514, and HIND Plates
Detailed breakdown of mechanical properties, uses, and availability across grades like S690QL, S960QL, A514, and more
Cutting, Sourcing, and Certification Services
Discover our custom cutting services, compliance support, and manufacturing strength across India.
Make Smarter Purchasing Decisions
Understand key differences between Q&T grades, their use over normalized plates, and proper cutting/welding methods
Understand key differences between Q&T grades, their use over normalized plates, and proper cutting/welding methods
View All →
Supplying to UAE, Africa, Southeast Asia, Europe
Learn how we manage international dispatches with port loading, packaging, and MTC documentation.
Answers to 50+ Buyer & Technical Questions
Covers everything from pricing and thickness to welding, impact properties, and export packaging.
Read All →
Covers everything from pricing and thickness to welding, impact properties, and export packaging.
+91-22-66159018
+91-9820944724
sales@hindustansteel.com hindustansteel1@gmail.com